Shark Adhesive two-component adhesive is really stable?
If you are looking for a ** really durable, solid, alternative mechanical connection ** industrial glue, then you must not miss the focus of today’s talk – two-component high tack adhesive, especially ** Shark Adhesive’s high initial adhesive series **, is really good to use!
First, what is High Tack Adhesive and why are factories using it?
High tack adhesive, its most central feature is: ** just a contact, can produce extremely strong “initial adhesive force” **, so that the material “temporarily fixed” down, for subsequent curing to provide sufficient conditions.
But pay attention to ⚠️: it is not a quick-drying adhesive. Don’t be confused!
We are talking about two-component High Tack Adhesive, emphasizing the structural adhesive level of strength + initial adhesive performance, not the pursuit of immediate drying, but the pursuit of drying stable, firm drying!
Like Shark Adhesive launched this class of two-component adhesive, is through the AB component reaction to form ** polymer mesh structure **, really do:
✅ High bonding strength
✅ Strong initial positioning force
✅ High temperature and impact resistance
✅ Long-term structural stability
Second, why more and more manufacturers use Shark Adhesive?
The reason is actually very realistic: it is not easy to make mistakes.
Two-component = strong stability
Don’t look at the fast-drying adhesive speed, but used in metal, plastic, composite materials and other different materials, aging problems are extremely numerous. And Shark’s two-component system bonding interface is stable and can adapt to more scenarios, including:
Metal-to-metal bonding
Stainless steel, aluminum, glass, PVC bonding, etc.
3. Not afraid of environmental challenges
The wind and sun, hot and cold, traditional adhesive is easy to become brittle, discoloration, loss of adhesion. Shark Adhesive, ** anti-aging, anti-vibration, moisture and mildew resistant performance pull full **, industrial and home furnishing all eat.
Third, common misconceptions: High Tack ≠ fast drying! You step on the pit?
Thought 10 minutes can be dry
No wait for the chemical reaction to complete the strong pull material
Not according to the proportion of mixed A/B components
Suggestions for correct use:
Mix in strict ratio
Finish assembly within a reasonable time after glue application
Avoid disturbing the material during curing