Polyurethane adhesive for honeycomb panels Rail Interior Decoration Bonding
Youxing Shark's two component polyurethane adhesive applies for rail interior decoration panels like indoor aluminum veneer, aluminum honeycomb panel, aluminum square pass, metal stretched mesh, galvanized steel plate, aluminum grille, aluminum ceiling, etc. The high-strength and high weather-resistant polyurethane adhesive of the shark can meet the high standard requirements of the above-mentioned composite bonding of various materials, and ensure the long-term adhesion of the high-speed rail interior decoration materials. Honeycomb panel is a plate made of two thinner panels firmly bonded on both sides of a thicker honeycomb core material, also known as honeycomb sandwich structure.
Rail interior board
The honeycomb panel is a plate made of two thinner panels firmly bonded on both sides of a thicker honeycomb-shaped core material, also known as a honeycomb sandwich structure. House ceiling panels are a typical one. Paper honeycomb panel is a new type of green packaging material that has emerged in developed countries this year that saves resources, protects the ecological environment, and is low in cost. It has many advantages such as lightness, strength, stability, heat preservation, heat insulation, and shock resistance.
Honeycomb panels are divided into functions: buffer honeycomb panels and packaging honeycomb panels. Because of its special structure, it can improve the compressive strength, and the paper honeycomb panel can reduce the cost. The aperture of the honeycomb panel is generally divided into 8mm, 16mm, 32mm size, and the paper honeycomb panel weighs 280 grams per square meter. Paper honeycomb panels can be used to make all kinds of pallets, cushions, packaging boards, packaging boxes, etc. Paper honeycomb panel is a new type of green packaging material that has emerged in developed countries to save resources, protect the ecological environment, and have a low cost. It has many advantages such as lightness, strength, stability, heat preservation, heat insulation, and shock resistance. In terms of volume, it is as small as 0.4 cubic meters and as large as 6 cubic meters. The load is 1 kg light and 2500 kg heavy.
Our pu adhesive has many great features:
1. Light weight, less material, low cost
2. High strength, smooth surface, not easy to deform
3. Impact resistance, good cushioning
4. Sound absorption, heat insulation
5. No pollution, environmental protection
Room temperature curing
It can be cured at room temperature and is easy to operate. The quality meets the GB/T7124-2008 standard and the GB/T 1457-2005 sandwich structure drum peeling standard.
The cohesive strength of the adhesive layer and the adhesive strength between the adhesive layer and the bonded surface are high. It can ensure that the plates will not crack after bonding, and the tensile strength is ≥6Mpa (aluminum plate is bonded to aluminum plate).
Under agitation, the viscosity of the glue drops rapidly, which is convenient for painting; when it is stopped, the viscosity of the glue increases immediately and will not flow randomly.
High bonding strength
It can ensure that the plates will not crack after being bonded, and the tensile strength is ≥6Mpa (aluminum plate is bonded to aluminum plate)
Q: Are you manufacturer or trading company ?
A: We are manufacturer focused on adhesive for 20 years. So we have more competitive price than trading companies. We also have professional overseas team to provide service for you.
Q: Is your polyurethane adhesive two component ?
A: Yes. Our pu adhesive has two parts, including polyol resin and curing agent.
Q: How’s your packing of adhesive ?
A: Pu adhesive has two packing, one is 25kg/barrel. Another is 1500kg/plastic drum.
Both two packing will match corresponding curing agent together.
Q: Where is your factory?
A: We have two production base, Shanghai and Zhuhai. We have 190000 tons annual production capacity in total. Both of them are near shipping port.
Q: How’s the testing result ?
A: 1.Tensile shear strength test is 9.9MPA. Flexural strength 575MPA.
2. Freeze-thaw resistance test report is 30 circles. (After Soak in water at room temperature for 8 hours, then put it in a low temperature test box at -20℃Medium freezing for 16 hours, two steps are one cycle, one cycle is 24 hours.)
3. SGS report shows all of our adhesive is environmental-friendly.
4. For other test results, please contact our sales for more details.
Flatness standard: +0.1mm surface must be clean, oil-free, dry and water-free.
The supporting roles of the main agent (off-white) and curing agent (dark brown) are executed in corresponding proportions, such as 100:25, 100:20
After mixing the main agent and the curing agent, stir evenly quickly, and use a stirrer to repeatedly pick up the gel 3-5 times without silky brown liquid. The mixed glue will be used up within 20 minutes in summer and 35 minutes in winter
(1) 200-350 grams (materials with smooth interlayer: such as inorganic boards, foam boards, etc.)
(2) 300-500 grams for delivery (materials with interlayer porous: such as rock wool, honeycomb and other materials)
The glued board should be compounded within 5-8 minutes and pressurized within 40-60 minutes. The pressurization time is 4-6 hours in summer and 6-10 hours in winter. Before the pressure is relieved, the adhesive should be basically cured
Pressure requirement: 80-150kg/m², the pressure must be balanced.
The curing temperature is above 20℃, and it can be processed lightly after 24 hours, and can be processed deeply after 72 hours.
After the glue is used up every day, please clean it with dichloromethane, acetone, thinner and other solvents to avoid clogging of the glued teeth and affect the amount of glue and the uniformity of the glue.