China Purification Board Bonding Manufacture and Factory | Youxing Shark

products

Purification Board Bonding

Polyurethane adhesive for purification board bonding

Code: SY8430 series

Main solid ratio 100:25 / 100:20 / 100:40

Gluing process: manual squeegee/machine spraying/hot pressure spraying

Packing: 25 KG/barrel 1500 KG/plastic drum


Product Detail

Product Tags

Application

https://www.sharkadhesive.com/purification-board-bonding-product/

Application

打印

Cleanroom panel

Apply for

purification board panel, acptic panel, operating room wall

Surface material

color steel plate, color aluminum plate, stainless steel, galvanized sheetetc.

Core material

rock wool, polystyrene board, extruded board, aluminum honeycomb, paper honeycomb, inorganic board, etc.

Product Features

Purification board, also named cleanroom panel. Our cleanroom panel adhesive have many great features, like curable at room temperature/curable by heating, flexible operation time, strong weather resistance, easy to brush / easy to spray. Adhesive for cleanroom panel is top product in our company. Two component adhesive has higher bonding strength than single component adhesive.

Operation Specification

STEP 01 The surface of substrate should be flat and clean.

Flatness standard: +0.1mm surface must be clean, oil-free, dry and water-free.

STEP 02 The ratio of adhesive is critical.

The supporting roles of the main agent (off-white) and curing agent (dark brown) are executed in corresponding proportions, such as 100:25, 100:20

STEP 03 Stir the glue evenly

After mixing the main agent and the curing agent, stir evenly quickly, and use a stirrer to repeatedly pick up the gel 3-5 times without silky brown liquid. The mixed glue will be used up within 20 minutes in summer and 35 minutes in winter

STEP 04 Standard of the amount

(1) 200-350 grams (materials with smooth interlayer: such as inorganic boards, foam boards, etc.)

(2) 300-500 grams for delivery (materials with interlayer porous: such as rock wool, honeycomb and other materials)

STEP 05 Sufficient pressurization time

The glued board should be compounded within 5-8 minutes and pressurized within 40-60 minutes. The pressurization time is 4-6 hours in summer and 6-10 hours in winter. Before the pressure is relieved, the adhesive should be basically cured

STEP 06 Sufficient compression strength

Pressure requirement: 80-150kg/m², the pressure must be balanced.

STEP 07 Set aside for a while after decompression

The curing temperature is above 20℃, and it can be processed lightly after 24 hours, and can be processed deeply after 72 hours.

STEP 08 Gluing equipment should be washed frequently

After the glue is used up every day, please clean it with dichloromethane, acetone, thinner and other solvents to avoid clogging of the glued teeth and affect the amount of glue and the uniformity of the glue.

Test Contrast

c2

Pu polyurethane adhesive also has lots of other abbreviations as follows :

Polyurethane Glue, Pu Glue, Polyurethane Construction Adhesive, Pu Adhesive, Polyurethane Based Adhesive, Polyurethane Foam Adhesive, Polyurethane Foam Glue, Pu Foam Adhesive, Two Part Polyurethane Adhesive, Structural Polyurethane Adhesive,  2 Part Polyurethane Adhesive, Polyurethane Construction Sealant,  Pu Bond,  Polyurethane Bonding, Polyurethane Based Glue, Pu Foam Glue, Polyurethane Construction,  Polyurethane Adhesive Glue, Pu Based Adhesive, Poly Glue Adhesive.


  • Previous:
  • Next:

  • Write your message here and send it to us