China Wood glue For Medium Hardwood Woodworking Manufacture and Factory | Youxing Shark


Wood glue For Medium Hardwood Woodworking

Water based adhesive for medium hardwood woodworking

Code: SY6118 series

The mixing ratio is 100:12

Packing: 20 kg/barrel 1200 kg/platic drum

Application: wooden floors, wooden doors and windows, wooden furniture, wooden crafts bonding

Product Detail

Product Tags

The two-component water based glue is developed for the characteristics of wood material and the characteristics of large deformation due to absorption and loss of water. It can penetrate into the wood well, and the glue has excellent film formation and strong cohesion, especially it can react with the characteristics of wood fibers. The group forms a good chemical bond, which solves the problem of easy cracking of the wood panel. Water based glue has good water resistance, high bonding strength, environmental protection, and has excellent water resistance, weather resistance, extremely high bonding strength, fast drying speed, good toughness, impact resistance, suitable for cold and hot pressing and high frequency bonding, and strength.The grade is the highest level D4. The waterproof grade of the glue reaches the GB18535-2008 standard and can pass the Japanese Agricultural Standard (JAS) test.

Applicable Material


Rubber wood


Chinese Mahogany








Eucalyptus wood





Applicable Machine


Manual fixture


Four-sided flip jigsaw machine


A-shaped jigsaw machine


Fan blade rotating jigsaw machine

Product features


Quick dry

It is suitable for high-frequency machines, fully automatic splicing machine technology, and unlimited weather.


High bond strength

The initial adhesion is good, and the bonded material will break 100% in 24 hours.


Easy to paint

The glue that has been mixed with the main solid foams, the glue has passed the active period, and the fluidity can be restored after stirring


Low price over the same period

The cost is lower than most products on the market under the same quality conditions, and the quality of the same grade glue is higher than most products on the market.

Operation Specification

STEP 01 Flat substrate is the key

Flatness standard: ±0.1mm, moisture content standard: 8%-12%.

STEP 02 The ratio of glue is critical

The main agent (white) and curing agent (dark brown) are mixed according to the corresponding ratio 100:8 100:10 100:12 100:15

STEP 03 Stir the glue evenly

Use a stirrer to repeatedly pick up the colloid 3-5 times, and there is no filamentous brown liquid. The mixed glue should be used up within 30-60 minutes

STEP 04 Fast and accurate glue application speed

Gluing should be completed within 1 minute, the glue should be uniform and the end glue should be sufficient.

STEP 05 Sufficient pressurization time

The glued board should be pressed within 1 minute, and must be pressurized within 3 minutes, the pressing time is 45-120 minutes, and the extra hardwood is 2-4 hours.

STEP 06 The pressure must be sufficient

Pressure: softwood 500-1000kg/m², hardwood 800-1500kg/m²

STEP 07 Set aside for a while after decompression

The curing temperature is above 20℃, light processing (saw, planing) after 24 hours, and deep processing after 72 hours. Avoid sunlight and rain during this period.

STEP 08 Rubber roller cleaning must be diligent

A clean glue applicator can ensure that the glue is not easy to block, otherwise it will affect the amount and uniformity of the glue.

Test Contrast

  • Previous:
  • Next:

  • Write your message here and send it to us