China Wood glue For Softwood Woodworking Manufacture and Factory | Youxing Shark


Wood glue For Softwood Woodworking

Water based adhesive for softwood woodworking

Code: SY6103 series

The mixing ratio is 100:10

Packing: 20 kg/barrel 1200 kg/plastic drum

Application: wooden floors, wooden doors and windows, wooden furniture, wooden crafts bonding

Product Detail

Product Tags

Cork, an environmentally friendly and renewable material, is now widely used in our lives. Cork stoppers, cork mats, and cork crafts are all cork products that we can often see in our daily lives. Based on its advantages of heat preservation, heat insulation, sound insulation, antistatic, non-toxic, flame retardant, and soft texture, cork has also begun to be widely used in the field of indoor soft decoration. Take cork flooring as an example. Cork flooring has risen in my country since 2001 And applied, sales are growing rapidly at a rate of 30% per year.

Youxing Shark's wood glue is two component, including main agent and hardener. Actually only main agent is good enough for bonding cork. For some customers' demand, 2 part wood glue has higher bonding strength than one component glue. Before we recommend our products, we need to know your material, your application machine and so on. Then we can suggest suitable water based wood glue for you.

Applicable Material


Pine wood


Poplar wood






Lacquer wood


Cypress wooden




Mongolian scotch pine

Applicable Machine


Manual fixture


Four-sided flip jigsaw machine


A-shaped jigsaw machine


Fan blade rotating jigsaw machine

Product features

1. The adhesive is a water-based adhesive and does not use organic solvents.
2. Without heating, cold pressing can obtain good bonding strength, with water resistance, heat resistance, solvent resistance, aging resistance and other properties.
3. The adhesive is not a simple physical bond. The wood reacts chemically with the adhesive to make the adhesive and the bonded object truly become one.
4. It does not cure under neutral conditions, is non-formaldehyde, does not contain phenols and amines, and the puzzle glue does not produce harmful gases, pollution, non-flammable, and does not stain the bonding layer.
5. The pressurizing time is short, the operation is convenient, and the use temperature range is wide.

Operation Specification

STEP 01 Flat substrate is the key

Flatness standard: ±0.1mm, moisture content standard: 8%-12%.

STEP 02 The ratio of glue is critical

The main agent (white) and curing agent (dark brown) are mixed according to the corresponding ratio 100:8 100:10 100:12 100:15

STEP 03 Stir the glue evenly

Use a stirrer to repeatedly pick up the colloid 3-5 times, and there is no filamentous brown liquid. The mixed glue should be used up within 30-60 minutes

STEP 04 Fast and accurate glue application speed

Gluing should be completed within 1 minute, the glue should be uniform and the end glue should be sufficient.

STEP 05 Sufficient pressurization time

The glued board should be pressed within 1 minute, and must be pressurized within 3 minutes, the pressing time is 45-120 minutes, and the extra hardwood is 2-4 hours.

STEP 06 The pressure must be sufficient

Pressure: softwood 500-1000kg/m², hardwood 800-1500kg/m²

STEP 07 Set aside for a while after decompression

The curing temperature is above 20℃, light processing (saw, planing) after 24 hours, and deep processing after 72 hours. Avoid sunlight and rain during this period.

STEP 08 Rubber roller cleaning must be diligent

A clean glue applicator can ensure that the glue is not easy to block, otherwise it will affect the amount and uniformity of the glue.

Test Contrast

  • Previous:
  • Next:

  • Write your message here and send it to us